SpecFlatness
Related Docs:
object SpecFlatness
| package ugen
the fft signal (buffer) to analyze
the fft signal (buffer) to analyze
Abstract method which must be implemented by creating the actual UGens
during expansion.
Abstract method which must be implemented by creating the actual UGens
during expansion. This method is at most called once during graph
expansion
the expanded object (depending on the type parameter U)
A UGen to measure spectral flatness. Given an FFT chain this calculates the Spectral Flatness measure, defined as a power spectrum's geometric mean divided by its arithmetic mean. This gives a measure which ranges from approx 0 for a pure sinusoid, to approx 1 for white noise.
The measure is calculated linearly. For some applications you may wish to convert the value to a decibel scale. Note that this UGen may output NaN when the input is zero (probably due to division by zero). In that case,
CheckBadValuescan be used to prevent further problems.Note that despite running at control-rate, the output remains constant for each FFT frame. E.g. with an FFT size of 1024 and 50% overlap, a new measure is generated every 512 audio frames, or (at control block size 64) every 8 control blocks.
the fft signal (buffer) to analyze
CheckBadValues