trigger signal that causes the phasor to jump to the
resetVal
position
amount of increment per sample frame. I.e at a
speed of 1, each sample output by the UGen will be 1
greater than the preceding sample. To achieve a specific
frequency f
in Hertz, use a speed value of
f / SampleRate.ir
.
start value of the ramp
end value of the ramp (exclusive)
value to jump to upon receiving a trigger in the trig
input
trigger signal that causes the phasor to jump to the
resetVal
position
amount of increment per sample frame. I.e at a
speed of 1, each sample output by the UGen will be 1
greater than the preceding sample. To achieve a specific
frequency f
in Hertz, use a speed value of
f / SampleRate.ir
.
start value of the ramp
end value of the ramp (exclusive)
value to jump to upon receiving a trigger in the trig
input
A linear repeating ramp UGen between start and end values. Using a trigger input, it can be reset to a specific position. Upon reaching the end of its ramp,
Phasor
will wrap back to its start value. Note: Sinceend
is defined as the wrap point, its value is never actually output.Examples
LFSaw
Line
Stepper
Ramp